12V out FXW 1000W Full Brick DC/DC Converter
Calex Mfg. Co., Inc. announces the addition of the 12Vout model to the 1000W FXW full brick DC/DC converter series. The 24S12.84FXW has an ultra-wide 9 to 36 VDC input range and provides a regulated, isolated 12V output rated up to 84 Amps DC. The FXW series offers sense pins and a trim function with a trim range of +10% and -40%. Thermal management of the FXW series is made easier by the converter’s best in class efficiency of 95%. The FXW series, measuring 4.7” x 2.5” x 0.52”, comes with threaded inserts for baseplate or heatsink mounting for extended temperature operation. The operating baseplate temperature range of the FXW series is -40 to +105ºC.
The FXW’s series high efficiency and high power density are accomplished through the use of high efficiency synchronous rectification technology, advanced electronic circuitry, packaging and thermal design. The Input to Output isolation voltage of the FXW family is 2250VDC. The Input to Baseplate and Output to Baseplate isolation is also 1500VDC. The switching frequency is fixed at 200 kHz. The FXW series features ON/OFF control. With 12 and 24V battery applications in mind, the Off state current draw is typically 2mA. Output ripple and noise is 120mV peak to peak.
The FXW series of converters are protected by over current, short circuit protection, and over temperature protection, output overvoltage protection and input under voltage lockout. The FXW series of converters are backed by Calex’s Five Year Warranty. The MTBF of the FXW series is 5.4 MHrs. For more information on the FXW series, view the data sheet at http://www.calex.com/pdf/fxw.pdf or you can contact Calex at 800-452-3355/925-687-4411, www.calex.com or Fax 925-687-3333. Contact the Factory for pricing and delivery information. Calex’s corporate headquarters are located at 2401 Stanwell Drive, Concord, California, 94517 All Calex products are designed and built in the United States.